Squarebody Single Din Stereo Mount and Trim Template
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is designed to fit the dash of a 1984 K5 Blazer. I believe it should fit 73-87 (91).
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 181
- Wydruki
- 0
- Wyświetlenia
- 850
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This model is designed to fit the dash of a 1984 K5 Blazer. I believe it should fit 73-87 (91). This mount is designed to replace the flimsy metra dash kit. You will still have to trim your existing gauge bezel and metal dash with a 7.25" x 2.25" Rectangular Hole. There is another STL to trim the bezel. The mount is designed to utilize the 2 factory screw mounts on the gauge bezel to secure it to the gauge bezel. You could also use adhesive or epoxy. The mount has 4 screw holes on each side to secure to your stereo. I took the hole pattern from a Sony DSX-G80. You might have to verify your screw holes on your unit and add new ones. With this kit you no longer have to pull the entire gauge bezel to remove the stereo. If anyone prints this for a 73-80 Trucks please comment if it fits.
If you'd like to make a donation my venmo is @gilderbeast and my paypal is [email protected].