fixing rod for bike handlebar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ends of a fixing rod for bike handlebar, for maintenance and repairs. Parametric OpenSCAD code.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU Lesser General Public License
Handlebar fixing rod makes bike repairs easier, especially when the bike is hanged on a maintenance stand that doesn't have one. These are the ends of such a rod.
Required hardware:
- two tubes, 12mm and 10mm, that fit and slide in one another
- locking mechanism, like my collet https://www.printables.com/model/1421540-parametric-lock-collet-for-telescopic-rod
- two lengths of a 4mm bungee cord and two cord stoppers
You can replace the collet with e.g. some blue tape or duct tape (though you already have a 3D printer, so why would you?) You can also cut two 20mm slits at the end of the outer tube and use a small hose clamp to tighten it on the inner tube (maybe even hose clamp with a thumbscrew).
If you don't have easy access to 4mm bungee cord, you can make a TPU strap with a bunch of 16-18mm holes.