fixing rod for bike handlebar
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ends of a fixing rod for bike handlebar, for maintenance and repairs. Parametric OpenSCAD code.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU Lesser General Public License
Handlebar fixing rod makes bike repairs easier, especially when the bike is hanged on a maintenance stand that doesn't have one. These are the ends of such a rod.
Required hardware:
- two tubes, 12mm and 10mm, that fit and slide in one another
- locking mechanism, like my collet https://www.printables.com/model/1421540-parametric-lock-collet-for-telescopic-rod
- two lengths of a 4mm bungee cord and two cord stoppers
You can replace the collet with e.g. some blue tape or duct tape (though you already have a 3D printer, so why would you?) You can also cut two 20mm slits at the end of the outer tube and use a small hose clamp to tighten it on the inner tube (maybe even hose clamp with a thumbscrew).
If you don't have easy access to 4mm bungee cord, you can make a TPU strap with a bunch of 16-18mm holes.