1 / 3
Filament (Food) Dryer Extension Rings for Silvercrest
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rings to add between the trays of the Food Dryer
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Single part ring to extend a Silvercrest Food Dryer to fit Filament Rolls inside.
Could work with other Food Dryers as well.
It is printable on large printers only, like the Prusa XL.
I created several sizes so you can print the size best for your Filament.
You can also stack multiple on top of each other. For example, combine M and S to create a XL (14cm).
Sizes:
- XS 4CM
- S 6CM
- M 8CM > Prusament 1KG Spools
- L 10CM
- XL 14CM > Prusament 2KG Spools (or combine some)
Printing:
- Can only be printed on large printers (Prusa XL)
- The ring will be printed upside down.
- Using a 5mm brim on both (in- and out) sides. (the blue example is printed without brim - worked with XL Enclosure)
- Used the PEI Sheet with glue stick! (could ruin your sheet if you skip this)
- I printed them in ABS.
Depending the materials you want to dry (temperature and duration matter), you could also print in PETG, ASA or even PLA.
Check the Prusa Knowledge Base - Drying Filament for temperatures and duration
The Food Dehyrdrator I have is bought in juli of 2025 at Lidl.
Silvercrest SDA370B1 IAN 482201