Toy Helicopter Kit Card
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No Supports, Snap Together Toy Helicopter
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 200
- Wydruki
- 7
- Wyświetlenia
- 777
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
Originally designed for the Christmas Print Drive 2025 ran by Loyal Moses.
v38 / RC5 - I have increased the strength of the sprues and added an additional to the tail piece.
v39 / RC6 - I have increased the strength of the sprues by making them vertical and added a recess, for clean and safe removal. Cage also goes around the whole model for strength and to stop parts falling off easily.
v40 / RC7 - Final design of the sprues, making them strongest and clean to remove. Cage has also been thickened to make the model safer to transport.
I now have a THK version, with thicker frame and sprues, for use on printers that do not have a flexplate and require manual removal from the printer.
After assembly the rotors may be stiff, but the more you spin them the easier they should get.
Print Drive Settings:
Required
- MUST ENABLE ARACHNE Wall generation
- .2 layer height,
- 3 perimeters or more,
- 4 bottom layers or more,
- 4 top layers or more,
- 12% infill or more,
- No supports,
- SILK Filaments (add 2 perimeters and add 5% to infill),
Recommended
- MUST ENABLE ARACHNE Wall generation
- .2 layer height,
- 4 perimeters,
- 5 bottom layers,
- 5 top layers,
- 15% infill,
- No supports,
- SILK Filaments (double perimeters and add 10% to infill)