Swiss Gear Hardside luggage handle button replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement piece for the luggage handle mechanism.
- Ocena
- 4 / 5
- Polubienia
- 0
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 209
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
The button on the handle of the “Swiss Gear La Sarinne Hardside Spinner International Carry-On 20-Inch” is prone to breaking, making the user unable to retract or extend the luggage handle. This button is probably used in other bags of the same brand so I am making it available here.
I've made mine with the white PLA that came with my printer and it has been working perfectly, so I assume that this will work with almost every material.
Link to project on OnShape if you need to make some modifications: OnShape Link
Note: You will need supports on the bottom of the piece since it has to have that internal gap. Any simple “Normal(auto)” (OrcaSlicer reference) will work here.
IMPORTANT: This might not fit your bag even if the model is the same. Mine is an old model (2018) and SwissGear might have changed it over time, causing this to not fit perfectly. I am saying this based on this comment: https://www.printables.com/make/3415581. It worked for them, but not perfectly.
