Cat-Proof Spinning Door Handle Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stops cats from opening doors. This cover spins on the handle and has a special texture to prevent grip.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple, print-in-place solution to stop your clever cat from opening doors.
How It Works:
This design deters cats in two ways:
Unpleasant Paw Profile: The surface is covered with a specially designed texture that is uncomfortable for a cat's sensitive paws, discouraging them from even trying to grab the handle. It's completely harmless but effectively sends the message: “This is not for you!”
Free-Spinning Design (if not printed to tigh): The cover rotates freely around the door handle. When your cat tries to grab and pull down, the attachment simply spins, preventing them from getting the grip needed to operate the latch.
Sizing & Fit:
This model is designed by default for a door handle with a diameter of 20mm.
If your handle has a different diameter, you can easily scale the model directly in your slicer software to get a perfect fit. Just measure your handle and scale the model accordingly!
Printing Recommendations:
Material: PLA is fine enough
Layer Height: 0.16mm +-
Infill: should not matter, since its printed solid anyhow with a .4 nozzle.
Supports: No supports needed! It's designed to be print-in-place.