Street / Yard Lamp Finial Rod Ball
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ball for the rod on a street lamp
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Our lamp post had a plastic rod with plastic finial's on it, the rob bent in the summer heat and the finials failed a few years later. I replaced the rod with electrical conduit and final designed the printed these balls for the end of the rod to match the originals that had fallen apart.
Printed at 15% infill in PETG hopefully they last a few years outside, but at the price of printing myself i'll happily make new finials once a year if I need to.
Print with the opening down, you MUST add supports on build plate, the supports for this removed easier than any other object i have printed by simply grabbing them with a pair of pliers and pulling it out