1 / 2
Street / Yard Lamp Finial Rod Ball — image 1
1 / 2

Street / Yard Lamp Finial Rod Ball

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ball for the rod on a street lamp

Rating
0 / 5
Likes
0
Downloads
8
Makes
0
Views
85
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Our lamp post had a plastic rod with plastic finial's on it, the rob bent in the summer heat and the finials failed a few years later.  I replaced the rod with electrical conduit and final designed the printed these balls for the end of the rod to match the originals that had fallen apart.

Printed at 15% infill in PETG hopefully they last a few years outside, but at the price of printing myself i'll happily make new finials once a year if I need to.

Print with the opening down, you MUST add supports on build plate, the supports for this removed easier than any other object i have printed by simply grabbing them with a pair of pliers and pulling it out