1 / 4
Dish sponge tray with wring out holes - fits IKEA Vattudalen half-size sink
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A dish sponge tray with holes for wringing out the sponge. Fits IKEA Vattudalen half-size sink. Fits 2 sponges.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Dish Sponge Tray - for IKEA Vattudalen Half-Size-Sink
A dish sponge tray with holes for wringing out the sponge.
Fits 2 sponges. Length 96 mm, width 75 mm or 1 big sponge 96x150 mm.
With holes for excess water or dripping out.
Dimensions:
Inner Space: 150 x 96 mm (W x L)
Outer Dimensions: 155 x 100 mm (W x L)
Maybe suitable for other half-sized sinks. May need size correction in the slicer (don't forget to disable aspect ratio). But the circular holes may be elliptic after resizing.
Recommended print settings:
- Supports: Organic or standard (at least for the ears)
- Material: ASA if you want to wash it in the dishwasher at 60 °C or PETG for lower washing temperature; PLA is not recommended
- Nozzle: 0,4 mm or as you wish
- Layer height: 0,2 mm
- Infill: Gyroid, 30% (the ears need a bit of strength due to stress while wringing out a sponge)
- Post processing for a smooth sealed surface without tiny holes is recommended as bacteria and mold will sit in these areas and contaminate a fresh sponge (food hygienic)