BMW Phone Holder F10, F02 (maybe F11, F01, F03, F04)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BMW F10 phone holder
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 103
- Wydruki
- 1
- Wyświetlenia
- 1520
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of Mr_3D BMW phone holder. The original is designed for a different phone holder. In addition, I wanted it to be modular. The ball joint is standard - 17 mm in diameter. It was designed for an F10, it was also tested in a F02. It theoretically fits in an F11, F01, F03, and F04 as well.
The part that goes in the vent is printed with TPU 95A, and the other one is ASA. Just making sure it can handle the temperatures.
It survived my friend driving around with it, iPhone 15 Pro didn't budge.
The block going into the base is 38 mm x 22 mm x 8 mm, if you want to design a different joint.
Remember to consider layer orientation.