Gap Gauge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular gap gauge for measuring furniture and door gaps, stackable for larger sizes, 3D-printed with ±0.25 mm accuracy.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
A simple, modular Gap Gauge, enabling you to measure how large a gap is. This is ideal for e.g. furniture, for measuring gaps in doors or between the floor and a table leg e.g.. The components are:
- The gauge, going from 1 to 9 mm
- A shim, to add 0.5 mm
- A stackable block of 10 mm.
Note that the blocks can be staked among themselves too, enabling measuring beyond 19.5 mm.
I added the design file as well as the mesh for direct slicing.
I printed these parts with a 0.6 Nozzle and 0.3 mm Layer Height with PETG with CF. The parts are print-optimized and do not require supports. The tool produces an accuracy of about +/- 0.25 mm at these settings. For improved accuracy, I would recommend using a 0.4 Nozzle and smaller layer heights.
This tool was produced together with an article on Medium, showcasing how to evaluate tool-accuracy. The article you can find here: ###
The Spreadsheet for doing the maths you can find here