Starlink Gen 3 Router with Power Supply Wall/Desk Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Starlink mounting bracket seamlessly combining the Gen 3 router and power supply into a compact organized unit.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 94
- Wydruki
- 1
- Wyświetlenia
- 699
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed it with PETG filament, 0.4 nozzle and 10% infil. No problems and very steady especially after screwing the two parts together. Following is the original description:
Suggested Build Instructions:
Material - Atomic Filament Carbon Fiber PETG (Ideal for UV Resistance and Ductility)
https://atomicfilament.com/products/carbon-fiber-black-petg-pro
Other materials: PETG, ASA, ASA-CF, ABS, PLA (PLA may be too brittle for spring clamps)
Nozzle: 0.50mm
Bed Temp: 85c
Hotend: 255c
Extrusion Multiplier: 0.90
Layer Height: 0.20mm
Perimeters: 4
Infill: 25%, Rectilinear
Support: Paint-on, Triangles - Under Power Supply Tab, Wire Channel, and Router Catchment
