Blair Chanter Bag Adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This item is in no way approved or associated with Blair Bagpipes. This is something that I created for my personal…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 628
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This item is in no way approved or associated with Blair Bagpipes. This is something that I created for my personal use. I encourage you to buy official Blair Chanter products.
This is a work in progress....
Being the proud owner of a new Blair Electronic Chanter and a 3d printer combined with a desire not to spend $120 on an official Blair pipe bag I fired up the old Fusion to see what I could come up with.
This is a stock and an adaptor to plug a chanter into a bag. I made my own "pipe bag" which is really just a fancy pillow. The Chanter Stock has a slot for a hose clamp to attach it to the "bag". The Adapter is threaded to 10mm which should be the correct size for the chanter.
I printed this in SUNLU ABS on my Da Vinci 1.0. I then vapor polished the stock to give in a shiny and smooth appearance. The adapter I left rough, to avoid any shrinkage. I used some bagpipe hemp I had laying around to fit the adapter into the stock snugly.
The stock has a small cutout to allow you to run an audio cable through the "bag" and out the stock.
Print Settings
Printer Brand:
XYZprinting
Printer:
da Vinci 1.0 Pro 3in1
Rafts:
No
Supports:
No
Resolution:
.15
Infill:
50
Filament: SUNLU ABS Black/Red
Notes:
Any filament will do but I work with ABS so I can vapor polish. Color doesn't matter, use what you like.
Category: Other