Blair Chanter Bag Adaptor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This item is in no way approved or associated with Blair Bagpipes. This is something that I created for my personal…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 39
- Makes
- 0
- Views
- 630
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This item is in no way approved or associated with Blair Bagpipes. This is something that I created for my personal use. I encourage you to buy official Blair Chanter products.
This is a work in progress....
Being the proud owner of a new Blair Electronic Chanter and a 3d printer combined with a desire not to spend $120 on an official Blair pipe bag I fired up the old Fusion to see what I could come up with.
This is a stock and an adaptor to plug a chanter into a bag. I made my own "pipe bag" which is really just a fancy pillow. The Chanter Stock has a slot for a hose clamp to attach it to the "bag". The Adapter is threaded to 10mm which should be the correct size for the chanter.
I printed this in SUNLU ABS on my Da Vinci 1.0. I then vapor polished the stock to give in a shiny and smooth appearance. The adapter I left rough, to avoid any shrinkage. I used some bagpipe hemp I had laying around to fit the adapter into the stock snugly.
The stock has a small cutout to allow you to run an audio cable through the "bag" and out the stock.
Print Settings
Printer Brand:
XYZprinting
Printer:
da Vinci 1.0 Pro 3in1
Rafts:
No
Supports:
No
Resolution:
.15
Infill:
50
Filament: SUNLU ABS Black/Red
Notes:
Any filament will do but I work with ABS so I can vapor polish. Color doesn't matter, use what you like.
Category: Other