Quick release mount for E14 lampsockets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A magnetized quick release mount to hold your lampshade to an E14 socket. Screw on once, then snap forever.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I got tired of screwing and unscrewing the threaded ring when changing the lampshade on an E14 socket. This mount gets rid of that hassle.
The receiving ring is screwed on once. After that the grip just snaps on magnetically.
Utilizes 6 1.5x5mm round magnets. Prints fine through 0.4 or 0.6 nozzle. Schedule a pause in the gcode to insert magnets. Take care that all magnets are placed with the same polarity (at least within each part).
Usage:
- screw flat ring onto socket (minding polarities of flat and grip ring)
- place lampshade on socket (or over your hand holding the grip)
- put grip into place and let it snap on
REMEMBER: Electricity will kill you! [insert that funny poster with the stabby electricity] Make sure to use a safe, working, OSHA-approved, TÜV-geprüft socket without any wires sticking out and unplug the power cable. If you don't know what you're doing or if the socket seems fishy to you, hire an electrician to hang your lampshade for you or stick with the original, screwy part.