Flat Mesh Skirt for 2040 + Clicky Clack Door
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified version of the flat mesh front skirt to come to the front of the ClickyClack door on 2040 extrusion
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 365
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Looking at the giant step beneath the clicky clack door bugged me, so i spent entirely far too much time on this remix. Tolerances are kind of stupidly tight because im bad :D The center section reuses the parts from the original skirt, with only the back mounting part modified.
Beltguards are kind of a mess as i mutilated them with bambu studio, when split to parts there will be quite a few sections, but it should be clear which parts need turning into modifiers for the mesh effect.
Z drive covers need to be split to object, and the small sections turned to mesh by using 0 walls,0 top,0 bottom layers and whatever infil you like. make sure to block supports on the main body above these.
Just like the original the main skirt pieces have a part thats set to modifier.
If this is unclear, the included 3mf is setup from bambu studio with how i printed them for reference.
Most of the horrible things i did to these files was done in Plasticity, files attached.