Crazy Cucumber – Fridge Magnet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Crazy Cucumber – Fridge Magnet
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 71
- Wydruki
- 2
- Wyświetlenia
- 195
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Please click ❤LIKE❤ if you appreciate my work 😊
This funny 3D cucumber will keep your fridge looking cool and cheerful. With its silly grin and cartoonish vibe, it’s the perfect kitchen buddy to make you smile whenever you grab a snack.
Model details:
- Purpose: fridge magnet / decoration
- Dimensions: designed to fit comfortably on most FDM printers
- Back side has two holes for 5 × 3 mm neodymium magnets, ensuring strong hold and stability
- Solid model, no extra assembly required except gluing in the magnets
Printing:
- Recommended layer height: 0.1 mm
- Material: PLA / PETG (PLA is fine for home use)
- Infill: 10–15%
- Raft/brim: not necessary
Note: 0.1 mm layer height provides smooth details for the face, but increases print time. For faster prints, 0.16–0.2 mm is also fine.
Assembly:
After printing, simply glue two neodymium magnets (5 × 3 mm) into the holes on the back. Super glue (cyanoacrylate) works best. Make sure magnets are flush and secure.