Secure Collar Case for Chipolo ONE Point — Tight Fit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model I designed for Chipolo ONE POINT tag as I use these on my cats collar.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 46
- Wydruki
- 2
- Wyświetlenia
- 213
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a model I designed for the Chipolo ONE Point tag, which I use on my cat’s collar.
The ONE Point is advertised as splash-proof (IPX5), but in my experience it isn’t reliable. I made this case to fit the tag snugly while keeping it relatively light—ideal for a cat, dog, or other pet.
Fit & use
The case is very tight. Align the hole carefully during assembly.
I dunk-tested it for ~15 seconds; the tag came out dry. However, this is not fully waterproof.
Print settings (Ender 3 S1 Plus, 0.6 mm nozzle)
Layer height: 0.20 mm
Perimeters: 3
Material: PETG
Supports: None needed
Print time: ~23 minutes
Battery/maintenance
Because the fit is tight, you may need to pry the case open when the battery dies (about every 6 months). Opening it may compromise water resistance. An easy alternative is to print a new case with each battery change.