Liczymy pasujące modele…
4 posts using clear PETG (or other clear material). .15mm layer height with brim. I printed on the textured sheet, no post processing other than removing the brim and some minor stringing. Hot glue to hold in place. I love the snug case,…
Push-Fit Cutter/Plier holder for Multiboard/Multibuild. Push-Fit requires a Multiboard Snap.
This is a snug-fit vacuum adapter that connects a 35 mm Kärcher hose (tested with Kärcher KWD2) to the Bosch UniversalSander 18V-10. It is a remix of the Dyson DC19 adapter by lord_henry , adapted to fit 35 mm Kärcher hoses. The original…
Print without supports, whatever type of filament you like. Unscrew the end of the SV08, slide Part A on, put the end back on, add filament, screw on cap. The cones should clamp on to the filament. There is a slot on Part A for a zip tie,…
Make your bits fit deeper and tighter
Highly customisable snug box for drill bits. A lidded box for drills, initially designed to be as small as possible and fit each drill in a separate compartment. After surprisingly little effort the design application has been broadened…
The key to the bouncy surface is to use this hack! Print Specifications Filament: PETG Specification Value Estimated Print Time (Ender-3 V2) 30 Minutes Filament Used 5.2 g Layer Height 0.16 mm Wall Thickness 5 perimeters Infill Density…
OPTION: With or without supports Self-administerable portable single eyewash station. Crossover water flow for maximum eye surface exposure and water pressure. Adapter point accommodates standard commercial water bottle openings for quick…
Deliciously Realistic Popsicle - 3D Printer STL File Set This original, two-part popsicle is designed for easy, successful printing. Fun for kids and adults. INCLUDES: 2 x .STL Files (Raw model geometry) 2 x .3MF Files (Customized print…
Better fit for the file ATmount_front_arm_slide_Trident_offset.stl, and also removed the hole that was not needed.
A replacement knob for the Baratza Encore. Inspired by https://www.printables.com/model/166703-baratza-encore-lever
If you feel like your Hedronstack pieces interlock with too much play, then this remix is for you. Compared to the original pieces, these interlock with 30% smaller gaps. The pieces are more satisfying to place with less free-play, the…
The Snug Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. The thinness of the Snug box top…
Adult Lego raptor with slightly tighter fit and solid body.
Schütte/Schuette rollo blinds window clip that goes above window. I wanted it (a) because the original broke and (b) because being above takes less space meaning the door can open further if it opens indoors towards a door frame. Original…
Print without supports, whatever type of filament you like. Unscrew the end of the SV08, slide Part A on, put the end back on, add filament, screw on cap. The cones should clamp on to the filament. There is a slot on Part A for a zip tie,…
I made this rat snuggle box in Plasticity, and I am still learning. Feel free to make this any size that fits your rat/mouse cage. PETG works best (I think). HAVE FUN!
Main DPS unit: DPS3005, DPS5005 Female banana connectors: standard ones should fit OK Speaker spring connectors: standard double pole version 5521 DC jack: again, standard ones that look like this (approx. 9mm x 11mm x 14mm)
I used the last version of my keyboard foot successfully until we got a new cat who flopped his entire 14lbs onto the bottom edge of my keyboard. This resulted in these tiny molded plastic stabilizing fins to break off on one side of the…
The original cover was a tad loose. I added a dimple on each side to improve fit. The cover closes snugly now. Credit to @Julius7_1264617 for the original design. Note I also added an additional STL that incluldes a Q-Tip label for the…
A playful and endearing elephant sculpt, featuring a soft, round shape and gentle expression. Its oversized ears and delicate features capture the essence of a lovable, friendly giant, perfect for any collection.
Summary A snug fitting slide on case that's quite effective at containing odours. Instructions Instructions : Print this out twice, slide your PAX in :) This model is sized to fit the original pax tightly. If your printer is not well…
REMIX - shortened the peg and decreased the gap on the hole end to give a more snug fit for BRIO sets. May not be compatible with other train brands now. Original model:…
“Snuggle Cats – Purrfectly Adorable Companions” Two cats, one heart. These cuddly kitties are cozied up in the ultimate display of feline friendship (or love!). With their happy faces and intertwined heads, this cute duo is perfect for…
Tired of your drinks rattling around in the cupholders of your Hyundai i30N? This custom-designed cupholder insert offers a snug, no-rattle fit for standard 330ml/250ml beverage cans. Whether it’s a soda or an energy drink, this insert…
I noticed all the existing models for this have the incorrect bevel angle. This model ensures a snug fit, but not overly so. Please enjoy and share feedback~ Included models -A plate blank -An ‘Emergency’ plate Print resolution Doesn't…
This cupholder was originally too narrow and kept tipping over in my 2016 Kia Sedona cupholder. I made a TPU sleeve to fit the original design and that worked well. I printed in TPU for the flexibility and squishability. This was the…
Meet SnugglePop , the cuddliest critter in town! With soft, rounded features and a heart-melting grin, SnugglePop is more than just a toy—it's a bundle of joy packed with personality. From its chubby little paws to its swirly top curl and…
I was not satisfied how the original model fit on my Tesla P4, so I remixed it to work better for my use case. Printed from HT-PLA.
I have created a Kura hook that snaps directly on the bed frame. The design permits to hook on one or both side with or witghout a screw to hold it in place. The arms are slightly slanted to fit in place. I suggest PETG with 6 walls or…
These snuggling hearts are a cute valentine gift. You can use them as vase, pen holder or desk organiser. Scale them to the size you need.
Kozy koala - Snuggled up with eucalyptus dreams
These snuggling hearts are a cute valentine gift. You can use them as vase, pen holder or desk organiser. Scale them to the size you need. This is a remix of the original single colour file by Greenmagenta so that I was able to print it…
Heavily inspired by @Quesabyte 's design. https://www.printables.com/model/570584-pokemon-go-plus-belt-clip I wear this on my wrist attached to my watch strap though and it would fall out of the clip when I bump my arm. I built this model…
Make your bits fit deeper and tighter
Anything would probably fine, but it's a pretty snug fit so I'd use PETG if you don't want the potential for cracking or creep. Orientation is ready to print, no supports. Thanks to TheClarkJB for such a timeless design.
you need that: https://de.aliexpress.com/item/1005007148475800.html
This is a complete redesign, from the ground up in Freecad, of my original Volvo Door Lock Ring that has been optimized for printing with a 0.4 nozzle and snuger in-the-door fitment. Also, with more control, and a lot of practice, i was…
6" or 10" mini rack “legs” originally modelled after some monitor stand legs I needed to reduce the height of my monitor stand. Rack mounts you install are the lateral supports. I was only allotted a small space at the bottom of an IKEA…
It is made the be used with a magnetic USB-C cable. Put the magnetic end permanently into the ESP32-3C and easily hang your keys, powering the ESP32, perfect for home presence systems. ESP32-3C is connected means your keys are home, which…
There's plenty of HSW glue stick holders available, I wanted one that fits more snug and has more depth to ensure the glue sticks does not get knocked out easily. Inner diameter is 27mm. Requires support to print.
🌿 Snugleaf Cottage – A Cozy Forest Hideaway for Your 3D Printed Village Welcome to Snugleaf Cottage – a whimsical little home nestled under a leafy roof, perfect for fairies, gnomes, or any miniature friends in your magical world. Few…
Design, Function, and Customization This is an original 3D printed coin slot lid designed to screw tightly onto standard mason jars. The lid is precision measured for a secure fit and has been tested for reliable closure. Perfect for…
🪵 Snugstone Hollow – A Cozy Fairytale Cottage for Your Garden or Shelf Tucked away at the edge of the whispering woods lies Snugstone Hollow — a charming little fairy house brimming with storybook whimsy. With its scalloped roof tiles,…
Scan eines Engels der sich in einer Hand anschmiegt, stützen werden dringend empfohlen - beliebig skalierbar. Scan of an angel who nestles in one hand, support are strongly recommended - scalable at will.
Holds standard size business cards a little more snugly than the original model.
A case for the S8 phone, along with comedic logos on the rear of the case. If the logos are not your speed, and you still want the case, you can use casiopea987 work. There are two versions, and iPod styled one, and a “Smasnug” styled…
Description Organize your Vallejo paints with this compact, stackable miniature paint holder designed for hobbyists, model painters, and terrain builders. This rack holds 18 Vallejo dropper bottles with a snug, stable fit thanks to small…
I added cut outs to the Grid piece so it slots into the base. It helps the pieces seat together a bit better.
IMPORTANT: Requires Spiral Vase mode to be hollow: Print settings used for makes in the photos: Print Specifications: Boots Specification Value Estimated Print Time 29 Minutes Filament Used 9.1 g Layer Height 0.12 mm Wall Thickness 1…
Quick Facts Design: Custom-designed Aviators specifically sized for Labubu dolls with a snug, secure fit . Speed: Quick print that completes in approximately 28 minutes . Quality: Optimized with variable layer height for high detail where…
🐷 Cute Little Pig – SNUGGLES (cartoon, noAMS) This adorable piglet named SNUGGLES, with its big cartoon eyes and soft rounded features, is perfect as a desk decoration, a gift for animal lovers, or a playful accessory for a child’s room.…
Highly customisable snug box for drill bits. A lidded box for drills, initially designed to be as small as possible and fit each drill in a separate compartment. After surprisingly little effort the design application has been broadened…
Updates Update Jan 4, 2026: Seamless lid, tapered bottom and bottom lip. Fits snug into spool. Update Jan 3, 2026: Improved Threads High-Airflow Desiccant Pod (Secure Twist-Lock) A lightweight, high-performance desiccant container…
Obviously I don't own the LEGO ® brand, and the fact that this fits their bricks doesn't mean they support this model. Go buy their products if you want quality, this is just an homage to their brand, not a LEGO ® supported product. I…
The key to the bouncy surface is to use this hack! Print Specifications Filament: PETG Specification Value Estimated Print Time (Ender-3 V2) 30 Minutes Filament Used 5.2 g Layer Height 0.16 mm Wall Thickness 5 perimeters Infill Density…
Print Specifications from the photos Specification Value Estimated Print Time 48 Minutes Filament Used 5.6 g Layer Height 0.20 mm Wall Thickness 3 perimeters Top Fill Pattern Hilbert Curve Bottom Fill Pattern Hilbert Curve Supports…
OPTION: With or without supports Self-administerable portable single eyewash station. Crossover water flow for maximum eye surface exposure and water pressure. Adapter point accommodates standard commercial water bottle openings for quick…
Deliciously Realistic Popsicle - 3D Printer STL File Set This original, two-part popsicle is designed for easy, successful printing. Fun for kids and adults. INCLUDES: 2 x .STL Files (Raw model geometry) 2 x .3MF Files (Customized print…
Better fit for the file ATmount_front_arm_slide_Trident_offset.stl, and also removed the hole that was not needed.
A replacement knob for the Baratza Encore. Inspired by https://www.printables.com/model/166703-baratza-encore-lever
If you feel like your Hedronstack pieces interlock with too much play, then this remix is for you. Compared to the original pieces, these interlock with 30% smaller gaps. The pieces are more satisfying to place with less free-play, the…
The Snug Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. The thinness of the Snug box top…
Why? Yet another filament clip…..why? Because the existing ones didn't entirely suit my need. They would come loose or would just not hold my filament tight enough. Or they did not fit when the spools were full. Maybe it's just my spools…
Adult Lego raptor with slightly tighter fit and solid body.
Schütte/Schuette rollo blinds window clip that goes above window. I wanted it (a) because the original broke and (b) because being above takes less space meaning the door can open further if it opens indoors towards a door frame. Original…
Here is my version of the ubiquitous fillament clip. It was inspired by similar versions, but this one is a creation from scratch. Most of the filament clips that I have tried either were too loose on the reel side, and/or didn't grip the…
After noticing my patio umbrella starting to leave marks on our new wooden deck, I designed this custom base in Fusion 360. It sits directly under the pole (as shown in the real photos), evenly distributing the weight while keeping the…
I made this remix for myself but thought others might like it. I shrank the size by 1% for (what I feel) is a better fit. This would not be possible without the original design by JakeOfAllTrades and MCmasterP's remix :)
After printing this foot model on my Qiqi Q2: ( https://www.printables.com/model/1411842-qidi-q2-foot-support-with-extra-clearance ), I noticed that the feet were much too loose and didn't stay firmly attached. Since I didn't feel like…
The original dowels seemed abit loose so I printed these. They need cutting to size but you get 2 dowels per print
Hey ya'all, All holders I found were loose so drew and I iterated 5 times to make a prefect fitting on the radio, but still retain easy removal. This is based on the original battery with the original spring tension belt clip. I made the…
I found the 24 tooth gear in the original remix too loose for my sg90. My printer is not great at fine detail, so I opted to make the hole a bit smaller to better press fit the gear on Used the original 12 tooth gear's hole (which has a…
A snug Tamiya 10ml paint holder designed to stick to the bottle for easy use.
ScrubSnugs can increase and maintain drawstring tightness, so that scrubs hold up better during activity. They are also a countermeasure for difficult-to-untangle knots. One drawstring is set in each side slot, crossed over each other and…
This is my remix Esquilo's Arduino case. I think the intention behind the original design was to create a smart looking case to house a finished project. My remix isn't as pretty as it is intended to be a permanent home for my prototyping…
A snuggly fitting DJI Osmo Pocket mount for many phones. This mount includes a holder for the lightning and USB-C Adapter. The tripod adapter is fitting into one of the plug holders and is available in 1/4" and 3/8". I recommend this nut…
This is a holder for a Ridgid 18V battery. The fit is snug and the back has a slight (5 degree) angle. It is intended to be mounted to a wall or the vertical face of a cabinet. This design has been updated to include a v2 that is looser…
Print everything, align well, and give it a solid press from the top with your palm. You need some force to assemble, but it won't fall apart in your kids' hands.
Replacement cam for the locks on my Snugtop Fiberglass Top for my 97 F-250HD. These should probably stay metal but I didn't want to pay to replace them. Customizer enabled to allow tweaking of dimensions. Note that the Customizer will…
A snug fitting case for the Arduino Ethernet with screw board mounts and a snap top. Category: Electronics
My kids use these snug waterbottles and they broke the button on two of them so far by dropping them. Snug does not sell replacement parts, just the complete waterbottle. So I make a new version in Tinkercad.
Several years ago, I got tired of constantly having to stoop down to put on my shoes. Tying laces just feels so… Medieval. For a while, I experimented with a variety of "stretchy lace" solutions, but they were far more expensive than…
These brackets will put the front of the LCD snug up against the rail of my Lack Pocket Doors with the bed all the way forward and just millimeters away from the plexi. This buys a bit more space for heat bed cables in the back. See my…
This is a simple snug fit/snap in holder for the Alphatronics TV/sat remote and a ChromeCast4 remote. This TV is used in Frankia motorhomes - probably other places too. Blank back to simplify mounting to wall or under cupboard surface…
Alternative mounting set for IKEA Skådis. These mounts fit snugly into the elongated peg holes and are designed to use countersunk drywall screws, (DIN 18182 and similar) right through the 4mm holes. The cap covers the screws by snapping…
already print the original version here https://www.printables.com/model/272114-kingroon-top-mount-filament-holder , but the sloop (insert on aluminum profile) is too loose and wobbles, so I redesign, it and make it bigger, longer and…
I scaled the cap to 97% for a snug fit on the ornaments with no glue.
The lids on this stuff doesnt last as long as the glass. Rather than buying new sets and discarding the old glass, I made these. I print them out of PETG as it's somewhat food safe, although I'm not sure how food safe anything FDM printed…
A redesigned camera mount that fits the Wyze v3 perfectly. I remixed the Original by PrinterPro to make it thinner and use less material. It fits specifically the Wyze v3 Camera very snugly. Printed in PETG, I used 4 Walls and 25% Gyroid,…
This is a box designed to demonstrate Snug Hinge and Latch. Box Length (Inner) = 150 mm Box Width (Inner) = 75 mm Box Height (Inner) = 19.25 mm Box Bottom Height (Inner) = 15.25 mm Box Top Height (Inner) = 6 mm Box Radius (Inner) = 4 mm…
The Snug Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. The thinness of the Snug box top…
The Snug Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. The thinness of the Snug box top…
The Snug Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. The thinness of the Snug box top…
The Snug Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. The thinness of the Snug box top…
The Snug Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. The thinness of the Snug box top…
![OG Prusa MK3 Tool Holder Remix [SNUGGED]](https://media.printables.com/media/prints/94d73780-a2ce-4a65-8b70-4aa965a063cf/images/10372032_b5292761-1a8d-4d2c-8c3b-0a144b2ce4c0_0cf2c7b4-ac68-4e54-aaf4-033bfab06bf5/og-tool-holder-snugged.png)
![Christmas Ornament Cap SNUG [Remix]](https://media.printables.com/media/prints/344846/images/2937657_64d45110-393c-42dc-bf49-b76438db4454/img_0384.jpg)
