1 / 9
Super Bouncy Gravitrax Trampoline - Snug fit - PETG Recommended - Fast — zdjęcie 1
1 / 9

Super Bouncy Gravitrax Trampoline - Snug fit - PETG Recommended - Fast

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Create the bouncy surface by setting the top and bottom layers to zero, gyroid infill 25%, and PETG filament.

Ocena
5 / 5
Polubienia
32
Pobrania
215
Wydruki
5
Wyświetlenia
873
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

The key to the bouncy surface is to use this hack!

Print Specifications

Filament: PETG

Specification

Value

Estimated Print Time (Ender-3 V2)

30 Minutes

Filament Used

5.2 g

Layer Height

0.16 mm

Wall Thickness

5 perimeters

Infill Density

25%

Solid Layers: Top

0

Solid Layers: Bottom

0

Perimeters

5+

Supports Required

No

Adaptive Layer Height

Disabled

Settings Used

  • This Print: 0.40mm nozzle • 245°C Nozzle • 80°C Bed

Print Notes

  • Optimized for Ender 3 V2 with BLTouch bed leveling

  • Uses off-print purge line to prevent nozzle blobs

  • Exported from PrusaSlicer

  • ⚠ Adjust temperatures +/-5C if experiencing adhesion or stringing issues

  • Recommended: Test on a small print first before large jobs

Tagi