Super Bouncy Gravitrax Trampoline - Snug fit - PETG Recommended - Fast
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Create the bouncy surface by setting the top and bottom layers to zero, gyroid infill 25%, and PETG filament.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 215
- Makes
- 5
- Views
- 873
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
The key to the bouncy surface is to use this hack!



Print Specifications
Filament: PETG
Specification | Value |
Estimated Print Time (Ender-3 V2) | 30 Minutes |
Filament Used | 5.2 g |
Layer Height | 0.16 mm |
Wall Thickness | 5 perimeters |
Infill Density | 25% |
Solid Layers: Top | 0 |
Solid Layers: Bottom | 0 |
Perimeters | 5+ |
Supports Required | No |
Adaptive Layer Height | Disabled |
Settings Used
This Print: 0.40mm nozzle • 245°C Nozzle • 80°C Bed
Print Notes
Optimized for Ender 3 V2 with BLTouch bed leveling
Uses off-print purge line to prevent nozzle blobs
Exported from PrusaSlicer
⚠ Adjust temperatures +/-5C if experiencing adhesion or stringing issues
Recommended: Test on a small print first before large jobs