1 / 1
Shorter MK3S LCD Mount for snug fit in Lack
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shorter mounts for the MK3/S/+ to buy a little extra space for the heatbed cable at the back in a Lack enclosure.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 587
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (1)Kolekcje (23)Powiązane
These brackets will put the front of the LCD snug up against the rail of my Lack Pocket Doors with the bed all the way forward and just millimeters away from the plexi. This buys a bit more space for heat bed cables in the back.
See my Pocket Doors for Lack Enclosure but this should work well with the standard doors too.