Miniature Boots for Labubu - Perfect Snug Fit - Seamless - Fast Print - Low Poly
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little boots that perfectly on Labubu's. ⭐Important: Slice with Spiral Vase.
- Ocena
- 4,5 / 5
- Polubienia
- 29
- Pobrania
- 239
- Wydruki
- 2
- Wyświetlenia
- 583
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
IMPORTANT: Requires Spiral Vase mode to be hollow:

Print settings used for makes in the photos:
Print Specifications: Boots
Specification | Value |
|---|---|
Estimated Print Time | 29 Minutes |
Filament Used | 9.1 g |
Layer Height | 0.12 mm |
Wall Thickness | 1 perimeters |
Infill Density | 0% |
Supports Required | No |
Print Mode | 👉Spiral Vase |
Adaptive Layer Height | Enabled |
Nozzle Diameter | 0.40 mm |
Settings Used
This Print: PLA • 1.75mm • 222°C Nozzle • 55°C Bed
Print Notes
Optimized for Ender 3 V2 with BLTouch bed leveling
Uses off-print purge line to prevent nozzle blobs
Exported from PrusaSlicer
⚠ Adjust temperatures +/-5C if experiencing adhesion or stringing issues
Recommended: Test on a small print first before large jobs
Print Specifications: Box
Specification | Value |
|---|---|
Estimated Print Time | 34 Minutes |
Filament Used | 4.5 g |
Layer Height | 0.12 mm |
Wall Thickness | 1 perimeters |
Infill Density | 0% |
Supports Required | No |
Print Mode | Spiral Vase |
Adaptive Layer Height | Enabled |
Nozzle Diameter | 0.40 mm |
Settings Used
This Print: PLA • 1.75mm • 222°C Nozzle • 55°C Bed
Print Notes
Optimized for Ender 3 V2 with BLTouch bed leveling
Uses off-print purge line to prevent nozzle blobs
Exported from PrusaSlicer
⚠ Adjust temperatures +/-5C if experiencing adhesion or stringing issues
Recommended: Test on a small print first before large jobs