Miniature Boots for Labubu - Perfect Snug Fit - Seamless - Fast Print - Low Poly
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Little boots that perfectly on Labubu's. ⭐Important: Slice with Spiral Vase.
- Rating
- 4.5 / 5
- Likes
- 29
- Downloads
- 239
- Makes
- 2
- Views
- 583
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
IMPORTANT: Requires Spiral Vase mode to be hollow:

Print settings used for makes in the photos:
Print Specifications: Boots
Specification | Value |
|---|---|
Estimated Print Time | 29 Minutes |
Filament Used | 9.1 g |
Layer Height | 0.12 mm |
Wall Thickness | 1 perimeters |
Infill Density | 0% |
Supports Required | No |
Print Mode | 👉Spiral Vase |
Adaptive Layer Height | Enabled |
Nozzle Diameter | 0.40 mm |
Settings Used
This Print: PLA • 1.75mm • 222°C Nozzle • 55°C Bed
Print Notes
Optimized for Ender 3 V2 with BLTouch bed leveling
Uses off-print purge line to prevent nozzle blobs
Exported from PrusaSlicer
⚠ Adjust temperatures +/-5C if experiencing adhesion or stringing issues
Recommended: Test on a small print first before large jobs
Print Specifications: Box
Specification | Value |
|---|---|
Estimated Print Time | 34 Minutes |
Filament Used | 4.5 g |
Layer Height | 0.12 mm |
Wall Thickness | 1 perimeters |
Infill Density | 0% |
Supports Required | No |
Print Mode | Spiral Vase |
Adaptive Layer Height | Enabled |
Nozzle Diameter | 0.40 mm |
Settings Used
This Print: PLA • 1.75mm • 222°C Nozzle • 55°C Bed
Print Notes
Optimized for Ender 3 V2 with BLTouch bed leveling
Uses off-print purge line to prevent nozzle blobs
Exported from PrusaSlicer
⚠ Adjust temperatures +/-5C if experiencing adhesion or stringing issues
Recommended: Test on a small print first before large jobs