Counting matching models…
This is another version of the Widdle Wadder. It fits 8mm x 2mm rare earth magnets. I made this one a 5-step model and rounded the edges. Printed in PETG with no supports. UPDATE: The magnets were starting to scratch the paint, so I added…
Is your tiny plush friend tired of being cooped up all day during the stormy winter months? Here's a solution to some of their micro problems! These tiny rain boots are designed to fit 20cm dolls though please be aware that your tiny…
Name's Charlie McGuinness the owner of McGuinty's Crafty Gifts from Weston Super Mare, England UK This is my First Model from Tinkercad of Shadow the Hedgehog/Ultimate Lifeform wearing his new Air Boots from Sonic Boom. I've decided to…
Yes, this model was made using AI, please don't review bomb just because the model was made using AI. If you have a genuine concern please print the model before leaving a bad review or let me know in the comments. You can block AI models…
Full Image Catalog The complete gallery of my works can be found at Portfolio. You can search by the file’s reference number or simply click the preview image to open it directly. This Puss in Boots model features the agile feline with…
Replacement sole pad for the Nordica B7 ski boots. Added also Fusion360 source file, if you would need to adapt a little bit… Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Supports: Yes Resolution: 0.2 Infill: 40%…
Paint and print using the AMS of your choice, or manually switch filament at different heights if you don’t have an AMS.
These are boots for a flat footed barbie. Does not fit the standard high heeled version. Print in flexible material such as 95a TPU. Also check out my other flat foot Barbie shoes
Tire mold for silicone tires for boots loader. Two parts mold. Made it a tight fit when going together to hold it. Want to use a tear resistant silicone. Have to twist the mold half's to get the tire out. Pics to help see how its done.…
Please note that this design has not yet been physically printed or tested. If you decide to print it, feedback is highly appreciated. Feel free to share any issues, fitment problems, or improvement suggestions so the design can be…
Tired of stinky boots after surfing? This is the solution I found. I hope you like it too. Note that I made some improvements to the shared model, after I did print it's first version, in the picture.
Replacement soles for Head Vector XR ski boots (front and rear) Designed to match original geometry and fit standard bindings Easy installation using existing screws Improves grip and protects the boot when walking Print in TPU…
06-12-2023: Apparently I'm an idiot because I never saw the comments saying that the scaling and orientations were stuffed up so I scaled them to ~8000% and oriented them all to Hopefully print well so I hope these new files work better.…
architects need it time: 4h.26min 7.89m and 24 gr X:6.4cm Y: 3 cm Z: 16.0 cm
3D printeable toothbrush holders that look like Welly boots! They have holes in the bottom to drain any water.
I took the cab from the mini lift, and modified it to fit the mini excavator. you'll need a 2.6x12mm screw to install. it's pretty simple to install but you'll need to take out the cab first
This is a scalable universal cup holder. It can be mounted standing on the lid or hanging on the base plate. It is designed in Freecad. The drawing can be easily modified. It can easily be enlarged in the slicer. An enlargement of 114%…
This is another version of the Widdle Wadder. It fits 8mm x 2mm rare earth magnets. I made this one a 5-step model and rounded the edges. Printed in PETG with no supports. UPDATE: The magnets were starting to scratch the paint, so I added…
Each boot has spaces to insert 6x2 mm magnets. These magnets are available on Amazon and other places. Use pliers to push the magnets into the boots - they need to be pretty snug so they won't come out.
Boulder hands and light boots with magnet D5x2 mm. Dummy can easly now climb on a fridge! Only one magnet can hold whole figure!
You will need string to hang it using the holes. You can chose from either walls or no walls. I would probably print it in PLA but let me know what works best.
I measured the original piece and constructed it with Fusion360. The people I made it for like it and want some more. I made the holes just in case for stability problems but they are not needed.
Is your tiny plush friend tired of being cooped up all day during the stormy winter months? Here's a solution to some of their micro problems! These tiny rain boots are designed to fit 20cm dolls though please be aware that your tiny…
I printed him with tree supports and small brim and then painted using air-brush, but you can also try to use painting and AMS. Hope it will bring you so much joy on this Christmas! If you would like to support me - you can buy me a…
3DSets vehicles are awesome, however the open CV axles have to be greased to prevent wearing out the connection, These boots are designed to protect all the open CV (universal) joints by allowing you to stuff them with Grease and not…
This is a modified version of the Lower Interior part of the 3D Printed RC Forklift from ProfessorBoots. For those who aren't using the same components, want to create their own switch solution or for any other reason don't need the…
Introducing Mini Santa Boots—A Holiday Classic That Sells! These charming Mini Santa Boots are the perfect addition to any Christmas tree, offering a playful and festive touch to holiday décor. Designed to hang with ease, these adorable…
Boots as gift packaging with Box and Lid. The Lid fits on both sides. The Box can be printed in Vase mode and has “Line Dance” engraved. In my Case it was a little money gift for a Line Dance Teacher, so the perfect match. Printed with…
Replacemen heel sole for expensive Italian boots by Charles David. This may not fit everyone but is an example of another use for 3D printing.
Boots. hope you enjoy :-) Print in 2 mm Hight :-) Hope you share your print picture :-) follow and like for more.
So this is just a quick and dirty model to replace a broken bootstrap on my sons wintersuit. I printed it with KungFu Flex TPU 85A. It is a pain to print with on my Ender 3 S1, but flexible enough to work as a bootstrap on a wintersuit.…
5Dev r-spec trail / enduro crank boots. the Printed from bottom to top on prusa mini. Tested printing with pla , xt-cf20 and Fillamentum Flexfill 98A. Flexfill 98A is correct strength for these protectors. Overhang threshold: 90
I was gifted a pair of old Pro Jump Stilts which had broken straps on them so I decided to redesign the straps and get them usable. I have started with the front strap, which is this model. I have printed it and got it working and…
The hinge is secured by a M4x8 bolt with a drop of Loctite. So it's prone to losing. The carbon part can then break and the boot is done. Print with PETG or some other durable material. Use supports for hinge part.
Printed with support and 0,2 layer hight Filament: Aurapol PET-G
Something to carry all my snowboarding equipment in one hand.
I couldn't find any model for rain boots on printable, so here it is. I made this to be used as pawn for games. Print with organic support. You can scale up without issue, i haven't try scaling down lower than 50mm in height. Thanks to…
Bootshaken un an Taschen oder Koffer auf dem Dachboden zu kommen gedruckt ohne supports aus PETG
Miniature accessory | Miniature | Diorama | Miniature Scene Customize the dimensions for your miniatures. I look forward to seeing your work with them. Have a happy printing time 💛
Lace handle for boots, I make it with ASA plastic, but you can use PLA, PETG or ABS. But print with minimum infill of 60%.
This is a project to integrate TheDiyGuy999's ESP32 RC engine sound generator into Professor Boot's mini RC Excavator . All you'll need is a speaker and amplifier, a few resistors, and an extra ESP32. AliExpress amplifier board .…
You are going to need to print the base, 4 pipes and probably 2 top corners(for boots). Also you are going to need to buy a small fan. I am using “120mm Small 12Volt Electric BBQ Blower Fan with Adjustable Controller…”
Designed this part since there wasn´t any on the internet, and a pair of new ones are 50 Euros. I use it on my Nordica GTS-8 Ski boots Hope you guys enjoy it :) Material PTEG Infill 90% Just ignore the bug on top of the piece. it will…
Protect your outdoor linear actuators from water ingress & freezing to prevent premature motor failures. Ideal for solar trackers. The smaller boot fits over the top of the actuator shaft & the larger boot fits at the bottom to cover the…
Dromaeosaur feet shoe-cover/boot for costumes/cosplaying. To ensure that this model fits your shoe, I suggest printing out a prototype first. For the best results, I recommend making these out of a flexible material such as TPU. I…
Dust Boots for GCI Outdoor Freestyle Rocker Camp Chair; to keep dust and dirt out of the spring mechanism. Print in TPU It might help to unscrew the top yellow part of the spring housing and insert it into the dust boot, then attach and…
Bootsystem - MVP with a hook for small shopping bags or the original charging cable. Use the orientation for the buildplate as provided in the STL. For more robust results: 4 Walls 8 Bottom layers 8 Top layers 0.2 layer height 25%…
Original part has a flat bottom. Modified part has the angled bottom.
Mine was sliding around on the tile floor so I made these.
The sword of Puss in Boots. True to the original. Can be scaled. If you have any questions or improvements, please write or rate it
While printing ProfessorBoots truck I encountered some small issues which this remix fixes: A small hole would appear in the back of the headlight bowls when slicing in Bambu, I've added a small chamfer to the inside end of the headlight…
Extended handle for Boots Deep Tissue Percussive Massage Gun (Boots is a British healthcare store, for those who don't know). Print Settings Printer I used: White (handle) is on CR-10S, Black (bracket) was printed on an Ender 3, Filament:…
This model was scaled for my cousin on my younger size so you might need to scale up the model for your fingers to fit. To print you shouldn't need supports or a brim but the supports could help.
Additional buckets for ProfBoots Excavator: Wide Bucket Narrow Bucket Wide Thumb
High quality CAT Logos for the RC Excavator, requires AMS or similar system for multicolour prints and superglue. Replacement arm and rear cover have recesses to allow accurate location of the logos and allows them to sit flush with the…
High quality CAT logos for Dump Truck. New dump bed has recesses for accurate logo installation, requires AMS or similar multicolour printing and superglue. I print the logos at 99% scale, the files are given at 100% scale so depending on…
High quality CAT logos for SkidSteer. New arms and rear cover have recesses for accurate logo installation, requires AMS or similar multicolour printing and superglue. I print the logos at 99% scale, the files are given at 100% scale so…
Boots of Swiftness : Minecraft the Movie Planter.
Modified V4 main body to provide support to the Prof. Boots V3 RC Skid Steer V3.0 PCB. Additionally I made a couple PCB brackets to prevent the PCB from falling off the skidder. The V1 is a simple hold down bracket, and the V4 includes a…
Puss in Boots - Shrek - Fan Art If you like my work find more here - https://www.myminifactory.com/users/printedobsession if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession want to know more…
Completely new design. Designed to fit existing parts (forks & body) of Professor Boots' RC ‘Forky’ Forklift. I got really tired of constantly fixing the string and unjamming the carriages/mast when my children ran the forklift… I needed…
These are seed starter pots designed to fit inside the 1020 Bootstrap Farmer Extra Strength Microgreen Trays . They fix 3 x 5 for a total of 15 starting pots per 1020 tray. The bottom is removable so when you're ready you can push the…
Name's Charlie McGuinness the owner of McGuinty's Crafty Gifts from Weston Super Mare, England UK This is my First Model from Tinkercad of Shadow the Hedgehog/Ultimate Lifeform wearing his new Air Boots from Sonic Boom. I've decided to…
Optimus Prime Body. Printed with an AMS unit. Some flames are easier to color in then others. I am far from a designer yet so definitely some things wrong with it but easy to work around or fix with a razor. Do have his Trailer to go with…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Sunlu Black Transmission Distance: 0 PLA Sunlu White Transmission Distance: 7.7 This print uses 2 unique filaments Swap Instructions: Start…
Motorcycle boots don't allow thestock shields to be fitted, and the rubber over aluminum seems like a too basic setup. This can be used not only with boots but also for normal fork bushings protection, especially the tall one, in case the…
100x160mm sign, advertising ACME Spring Boots, as seen in cartoons. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh version. Also see the…
Print settings: first layer height - 0.2mm layer height - 0.25mm perimeters - 14 @ standard extrusion width 0.45mm supports on build plate only supports type - snug material - PLA or PETG
print lid horizontally
There are 4 different cowboy boots made with AI. I touched-up some blemishes. You can use them just as deco pieces or as pen holders in the office. Fun detailed prints. I did not find too many cowboy boots of that sort around. Enjoy
Een kleine propeller van in de les Inventor 2022. A small propeller from the Inventor 2022 lesson.
Boots supplement to enable the large GW Sector Imperialis Basilicanum statues to stand on their own without the provided base. You may leave the statues without a base or mount them on another base of your choosing. Category: Buildings &…
-May need brims for adhesion. -Support needed for the hats (back side) -Easy to print!
I made simple shoes for Sonicake wah and expression pedals, for easier mounting into pedal boards. The pedal is attached
I wanted to add headache rack for my truck so I decided to build a pack that hopefully would have something for everyone. So I designed all of these. Very simple mounting with just two screws under the electronic cover. Link to remix…
These boots work for the Tadpole 2.5'' and should work for the HD version as well. They serve as bumpers to protect the carbon as well as landing pads. They also protect the motor screws very well, which was one of my beefs with the…
Yes, this model was made using AI, please don't review bomb just because the model was made using AI. If you have a genuine concern please print the model before leaving a bad review or let me know in the comments. You can block AI models…
Update: The extension motor mount was missing form the original release, it has now been added. Also it looks like there is some variation in MG90 servos. Servos other than the ones listed below from amazon may not fit. I have uploaded a…
I used original screws for fixing, I dont expect a long life :-)
My mum bought some heavy duty (~40kg) shelving units form Costco for her pantry. These are Whalen branded- see the photos for the box design. The pantry floor is linoleum so if the vertical columns of were placed directly on the floor the…
Full Image Catalog The complete gallery of my works can be found at Portfolio. You can search by the file’s reference number or simply click the preview image to open it directly. This Puss in Boots model features the agile feline with…
Full Image Catalog The complete gallery of my works can be found at Portfolio. You can search by the file’s reference number or simply click the preview image to open it directly. This Puss in Boots model features the agile feline with…
3 different styles of crank boots/protectors to fit your Race Face Aeffect cranks. V1 and V3 need re-orienting, v2 is easier to print with tear drop shaped holes and a flat surface to stick on the printer plate. more styles may come in…
Replacement sole pad for the Nordica B7 ski boots. Added also Fusion360 source file, if you would need to adapt a little bit… Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Supports: Yes Resolution: 0.2 Infill: 40%…
Modeled close to the Peterbilt 362 cabover this is an almost 1 for 1 swap of Professor Boots semi cab. All parts work on the original frame and any new pieces use existing mounting points. let me know what you think. You will need a few…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com You can search by the file’s reference number or simply click the preview image to open it directly. Print setup Infill: 100% (solid) Layer height: 0.08…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
