Silicone Nozzle Wiper Brush
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Silicone Nozzle Wiper Brush
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 84
- Wydruki
- 1
- Wyświetlenia
- 354
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free.
There are two types, one can accommodate a 20mmx6mmx2mm neodymium magnet, the kind that you find in most Prusa printer kit spare parts and a non magnet version. The magnet fit will be tight as it's meant to be a friction fit so you don't need to use any superglue, insert the narrow end into the cut out and push the magnet in and down to seat it.
You will require the silicone nozzle brush wipers. You can find them at BambuLab's website in the spare parts section for their A1 series printers, they come in a sleeve of three. They come with self-adhesive on the back, simply peel one off and apply into the indented head of the handle.
No supports are required.
Happy printing.