1 / 1

Prototype Jeep testing hueforge

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Project: jeepjump.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x154.5mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:

PLA+ Esun Black Transmission Distance: 0.1

PLA+ Esun Olive Green Transmission Distance: 1.5

PLA PolyLite Pro Army Beige Transmission Distance: 1

PLA+ Esun Bone White Transmission Distance: 6

PLA+ Sunlu White Transmission Distance: 5

This print uses 5 unique filaments

Swap Instructions:

Start with Black

At layer #7 (0.64mm) swap to Olive Green

At layer #9 (0.8mm) swap to Army Beige

At layer #11 (0.96mm) swap to Bone White

At layer #18 (1.52mm) swap to White for the rest.