Ford Focus Trim Retaining Pin for ZX3 ZX5 98AZ61519A16AA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have a 2003 Ford Focus ZX3. This trim retaining pin holds the trim in and lifts the package tray. P/N: 98AZ61519A16AA
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I have a 2003 Ford Focus ZX3. The pin holding hatch trim/package tray string has broken several times. I've bought replacements but they are always hard to find and expensive on ebay. It is a poor design. Purchasing a new one is about $25. So I decided to draw my own using Fusion and printed in PLA.
After a few iterations, I think I got it right. Installation was easy: it snapped right in and holds the hatch trim in nicely. Also, the package tray string is supported well. I printed it with a 0.4mm nozzle, 0.24mm layer height, and %40 infill. I printed on the side so that the ball at the top of the part and the clips on the bottom have more strength.
I don't know how long it will last. From an engineering standpoint, I expect that it will break during removal; the original Ford design was poor; At $0.04 each, I can afford to replace it. If you like it, let me know. Feedback is appreciated for part improvement.