Ford Focus Trim Retaining Pin for ZX3 ZX5 98AZ61519A16AA
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I have a 2003 Ford Focus ZX3. This trim retaining pin holds the trim in and lifts the package tray. P/N: 98AZ61519A16AA
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 82
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
I have a 2003 Ford Focus ZX3. The pin holding hatch trim/package tray string has broken several times. I've bought replacements but they are always hard to find and expensive on ebay. It is a poor design. Purchasing a new one is about $25. So I decided to draw my own using Fusion and printed in PLA.
After a few iterations, I think I got it right. Installation was easy: it snapped right in and holds the hatch trim in nicely. Also, the package tray string is supported well. I printed it with a 0.4mm nozzle, 0.24mm layer height, and %40 infill. I printed on the side so that the ball at the top of the part and the clips on the bottom have more strength.
I don't know how long it will last. From an engineering standpoint, I expect that it will break during removal; the original Ford design was poor; At $0.04 each, I can afford to replace it. If you like it, let me know. Feedback is appreciated for part improvement.