Beta Motorcycle Front Brake Line Relocation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevents brake line from rubbing on GPS or tablet mounted on the bars.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have a GPS or tablet mounted at the bars, the brake lines can get in the way/snag on them. This relocates the line compliance down to the forks.
This is a ground up creation of a similar product available for KTMs from Taco Moto.
You need to remove the rigid cover over the brake line. See the tool which uses a standard razor blade to make the slit. You may need to use a small C clamp to secure the blade. Be careful not to nick the line.
Theres a top and bottom part, labelled. The top one prevents the line from moving further up. See the Taco Moto video of general install procedure.
Print using 95A TPU with 4 perimeters, 4 top and bottom layers and 40% infill.
Fusion 360 files included.