Beta Motorcycle Front Brake Line Relocation
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prevents brake line from rubbing on GPS or tablet mounted on the bars.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 249
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have a GPS or tablet mounted at the bars, the brake lines can get in the way/snag on them. This relocates the line compliance down to the forks.
This is a ground up creation of a similar product available for KTMs from Taco Moto.
You need to remove the rigid cover over the brake line. See the tool which uses a standard razor blade to make the slit. You may need to use a small C clamp to secure the blade. Be careful not to nick the line.
Theres a top and bottom part, labelled. The top one prevents the line from moving further up. See the Taco Moto video of general install procedure.
Print using 95A TPU with 4 perimeters, 4 top and bottom layers and 40% infill.
Fusion 360 files included.