3D spacemouse alternative magnet plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnet plate uses 5x3 round magnets, everything works with original parts besides the knob / cap.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wasn't getting the best readings out of the bar magnets, so I recreated the original plate, and modified it to use 5x3 round magnets that sit exactly over the center of the hall sensors on the plate.
That also meant I had to enlarge the diameter of the original plate by a mm or two for enough wall clearance on the magnet hole edge, which led to a new knob design / new cap. I threw one together that kind of emulated the original real quick.
Here is a video of the space mouse in use (warning I cuss in the video so if you have kids tell them to go to their room or something).
Also you will need to print the sleeve for the knob cap in tpu. If you don't have tpu and want to be ghetto, you can probably use tape.