Skateboard wheelbase redrill jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Aligns redrill holes with the existing baseplate holes of any deck. Allows you to adjust wheelbase by 0.375" up or down
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Message me for custom redrill offsets and I'll add the STLs here.
I wanted to increase the wheelbase on my Heroin Skateboards Mutator 13 from 14.25" to 15". Instead of increasing the wheelbase on just the nose or the tail, I decided to do so on both to keep the pop angle as unchanged as possible.
Can use your regular hardware to align the jig, however I highly recommend generating some 5.2mm x 5.2mm x 20 mm cylinders in your slicer and printing them at the same time. These pop in perfectly to the jig and allow for a snug fit ands guarantee perfect alignment. The redill holes are raised to act as a drill bit guide to make sure your new holes are straight. Use a 5mm drill bit.