Skateboard wheelbase redrill jig
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Aligns redrill holes with the existing baseplate holes of any deck. Allows you to adjust wheelbase by 0.375" up or down
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 98
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Message me for custom redrill offsets and I'll add the STLs here.
I wanted to increase the wheelbase on my Heroin Skateboards Mutator 13 from 14.25" to 15". Instead of increasing the wheelbase on just the nose or the tail, I decided to do so on both to keep the pop angle as unchanged as possible.
Can use your regular hardware to align the jig, however I highly recommend generating some 5.2mm x 5.2mm x 20 mm cylinders in your slicer and printing them at the same time. These pop in perfectly to the jig and allow for a snug fit ands guarantee perfect alignment. The redill holes are raised to act as a drill bit guide to make sure your new holes are straight. Use a 5mm drill bit.