1 / 2
Secondary mirror holder with silicone glue holes — zdjęcie 1
1 / 2

Secondary mirror holder with silicone glue holes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This remix of the Smallest Telescope Kit for 150/750 adds three extra holes at the base of the secondary mirror holder.

Ocena
0 / 5
Polubienia
5
Pobrania
29
Wydruki
0
Wyświetlenia
167
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

These holes are designed for applying small blobs of aquarium silicone, providing a flexible, stable, and stress-free way to secure the mirror.

⚠ Notice: When using PETG or other filaments with low surface energy (such as PC), silicone adhesion can be reduced. To improve bonding, lightly roughen the contact surface or apply a suitable primer. ABS and ASA generally bond well with silicone, while PLA also gives good adhesion but is not appropriate for exterior.

My own print was made in PC-CF. Despite the lower adhesion of PC, the conical shape of the holes ensures the silicone blobs hold securely in place.


Thanks to La3emedimension for the original design :-)

Tagi