Secondary mirror holder with silicone glue holes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This remix of the Smallest Telescope Kit for 150/750 adds three extra holes at the base of the secondary mirror holder.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 29
- Makes
- 0
- Views
- 167
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These holes are designed for applying small blobs of aquarium silicone, providing a flexible, stable, and stress-free way to secure the mirror.
⚠ Notice: When using PETG or other filaments with low surface energy (such as PC), silicone adhesion can be reduced. To improve bonding, lightly roughen the contact surface or apply a suitable primer. ABS and ASA generally bond well with silicone, while PLA also gives good adhesion but is not appropriate for exterior.
My own print was made in PC-CF. Despite the lower adhesion of PC, the conical shape of the holes ensures the silicone blobs hold securely in place.
Thanks to La3emedimension for the original design :-)