X-Ray M18T (RC car) battery holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support for a larger battery e.g. 2s 1100 mAh LiPo with channel for a reusable cable tie
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
A larger battery doesn't fit into the chassis and “stands on edge” on the rim. This part raises the floor to the rim level so the battery can be mounted on a flat surface. Push a reusable cable tie e.g. “Workzone 250x7.5mm” through the channel as battery strap.
No provisions are made to secure the part itself to the car (other than being a fairly tight fit). Use e.g. thin double-sided tape or a small amount of silicon. There are a few pre-drilled holes in the base plate but take care that screws can never puncture the battery (risk of fire).