X-Ray M18T (RC car) battery holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Support for a larger battery e.g. 2s 1100 mAh LiPo with channel for a reusable cable tie
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
A larger battery doesn't fit into the chassis and “stands on edge” on the rim. This part raises the floor to the rim level so the battery can be mounted on a flat surface. Push a reusable cable tie e.g. “Workzone 250x7.5mm” through the channel as battery strap.
No provisions are made to secure the part itself to the car (other than being a fairly tight fit). Use e.g. thin double-sided tape or a small amount of silicon. There are a few pre-drilled holes in the base plate but take care that screws can never puncture the battery (risk of fire).