"Wirbelix" the hand mixer!!!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Children's toy with rattle effect, switch and rotatable stirrers.
- Ocena
- 0 / 5
- Polubienia
- 76
- Pobrania
- 106
- Wydruki
- 0
- Wyświetlenia
- 1234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Children's kitchen toy mixer “Wirbelix”!
- The mixing rods can be rotated freely.
- The switch has 3 settings. 0 - 1 - 2
- The front has a rattling effect when the rattle blade is installed.
- The rattle crank is optional.
- Matching mixing bowls also included.
-Everything has been tested and can be easily clicked into place.
Supports:
Supports are needed in a few places, see pictures, if you don't want to determine the supports yourself, use the 3mf files and set supports to: “for support enforcers only”. (from 3mf: Import 3D models only.)
Infill:
Between 10%-25% infill should be fine.
The body and everything else can be printed with 10% infill.
The Stirrers should have 20% - 25% infill to make them more reliable.
Perimeters:
2-3 perimeters.
----------------------------------------------
The "FrontRattle" is designed for one-time installation and is difficult to remove once installed.
I am an absolute fan of no support prints, but the model would have lost functionality in many places if I had designed it without supports.
----------------------------------------------
Have fun and happy printing. ;)