1 / 2
Kinnarps office chair wheel rubber tread — zdjęcie 1
1 / 2

Kinnarps office chair wheel rubber tread

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement rubber tread for Kinnarps office chairs

Ocena
5 / 5
Polubienia
4
Pobrania
24
Wydruki
1
Wyświetlenia
231
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This rubber tread fits the 50mm wheels on the Kinnarps 8000 and probably others.

Works great in Flex 40D. Prints fine without support on my MK4S although some imperfections at the seam on the overhang need to be cut away before installing on the wheel.

For maximum durability, print with 100% infill and make sure a concentric pattern is applied to the infill of all layers. See the .3mf file for recommended print settings.

There are two versions:
- Normal: Exact same size as the original, most durable.
- Thinner: Outer radius 0.5mm smaller. Slightly more flexible and easier to install. Uses about 25% less plastic.

When you put the tread on the wheel, make sure to align the notch on the tread with the bump on the inner side of the wheel.

Tagi