Kinnarps office chair wheel rubber tread
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement rubber tread for Kinnarps office chairs
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 24
- Makes
- 1
- Views
- 231
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This rubber tread fits the 50mm wheels on the Kinnarps 8000 and probably others.
Works great in Flex 40D. Prints fine without support on my MK4S although some imperfections at the seam on the overhang need to be cut away before installing on the wheel.
For maximum durability, print with 100% infill and make sure a concentric pattern is applied to the infill of all layers. See the .3mf file for recommended print settings.
There are two versions:
- Normal: Exact same size as the original, most durable.
- Thinner: Outer radius 0.5mm smaller. Slightly more flexible and easier to install. Uses about 25% less plastic.
When you put the tread on the wheel, make sure to align the notch on the tread with the bump on the inner side of the wheel.