E46 Coupe Midrange Mount/tweeter Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows tweeters to be mounted in the factory location and covers up the spare hole.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This mounting solution used the factory location with the factory screws to let you mount any tweeter component speaker with a screw mount that you desire. The hole is currently set to 40mm, but i have included the f3d file to allow you to make any changes.
This model comes as a 2 part system. The second part gets printed and slots around the 2 front pegs so that you can seal the door card off from the interior of the vehicle. After gluing on all the way, i used some weatherstripping that was 3/8"x5/16" to seal it off. Ive included a picture of how i applied the weatherstripping.
the model is for the passenger door, all you need to do is mirror it for the driver.