E46 Coupe Midrange Mount/tweeter Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows tweeters to be mounted in the factory location and covers up the spare hole.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 37
- Makes
- 1
- Views
- 263
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This mounting solution used the factory location with the factory screws to let you mount any tweeter component speaker with a screw mount that you desire. The hole is currently set to 40mm, but i have included the f3d file to allow you to make any changes.
This model comes as a 2 part system. The second part gets printed and slots around the 2 front pegs so that you can seal the door card off from the interior of the vehicle. After gluing on all the way, i used some weatherstripping that was 3/8"x5/16" to seal it off. Ive included a picture of how i applied the weatherstripping.
the model is for the passenger door, all you need to do is mirror it for the driver.