Search results: e46

Bmw E46 Wallart

2D Wallart BMW E46

BMW E46 Compact Parcel Shelf Support Strap Cord

Print with tree supports for the hole where the screw fits. Tie the end of a cord to it and the other end to the parcel shelf plastic part.

Clutch Stop E36 E46 E8x E9x F1x F2x F3x F8x

Clutch Stop for Bmw M 10 x 40 16 key-width Pla Full

BMW e46 rear carpet cover broken clip holder repair

Doorstep broken clip holder part replacement. Designed to have large surface area for glue to properly hold it. I have also designed the clip, check my other designs. Print with 5+ walls vertically oriented , and glue it on the bracket…

BMW E46 Park Distance Sensor PDC Cover for trailer hitch

For BMW E46 (Touring) trailer hitch. Stops the non-stop beeping in reverse gear when a fixed trailer hitch has been installed. You will need two pieces for the two sensors in the middle.

E46 dool panel close

BMW M3 E46 Keychain

BMW M3 E46 Keychain This keychain is inspired by the legendary BMW M3 E46 , a must-have for BMW and motorsport enthusiasts! For the best results, print with a 0.2 mm nozzle for finer detail. A stylish and practical accessory for M-series…

BMW M3 E46 (Most Wanted Edition) - Tuner Car Model

Relive the excitement of tuner culture with this 3D printable STL model of the BMW M3 E46 (Most Wanted Edition). This iconic tuner car model is perfect for car enthusiasts and Need for Speed fans looking to display a legendary street…

BMW E46 vent gauge holder for 52mm

This is a custom-designed, 3D printable vent gauge holder specifically made for the BMW E46 platform (1998–2006). Designed to fit directly into the center air vent, this holder allows you to mount a standard 52mm gauge (boost, AFR, oil…

BMW M3 E46 Anime car

Hey I made this M3 e46 using ia tools, i hope you like it !

BMW E46 gear shifter rear bushing

You must use the old metal housing. Printed in FLEX and glued inside. OEM: 25111222015 Strongflex: 031933 Should fit: BMW 1 E81 E82 E87 E88 BMW 1 F20 F21 BMW 2 F22 F23 BMW 2 M2 F87 BMW 3 E36 BMW 3 E46 BMW 3 E90 E91 E92 E93 BMW 3 F30 F31…

BMW E46 Rear Ashtray Slider Cover

Made this few years back. Still intact till today. Drop a comment for feedbacks Printed in ASA 100% fill. ABS or others Enable "Detect Thin Wall"

Breloczek do kluczy BMW M3 E46

Breloczek do kluczy BMW E46 M3

E46 vent air

body part

E46 dool panel close

E46

BMW E46 footwell light bracket

use press wire connectors as in the pics and glue it using super glue the difuser is press fit so you don't need to glue it ...just push it in connect 2 wires earth and positive to the interior lights cables then press it in place above…

BMW E46 Euro Console Cup Holder Insert

Re-upload of Thingiverse model: https://www.thingiverse.com/thing:5420255/files Original author: nelson334

BMW E46 Silhouette Wall Art

The BMW E46 , produced from 1998 to 2006 , is widely regarded as one of the most iconic models in the BMW 3 Series lineup. Admired for its perfect blend of performance, luxury, and precision engineering, the E46 became a favorite among…

LH Drive BMW E46 Ashtray USB Holder

Filament: ASA Supports: Yes (As Applicable) Infill: Minimum 15% Brim: Yes (As Applicable)

RC BMW e46 M3 GTR from NFS

Assembly video: All the parts are oriented to printing position by default The two main Body piece could be printed with minimal support. print with at least 20-30% infill. Head and rear light covers were printed with resin printer for…

BMW E46 Touring Trunk Caddy Bracket

These are brackets to mount an oddments tray (part no 51478230573) that is used in sedans instead of CD changer in the trunk. The brackets allow mounting the caddy in touring as well.

BMW e46 speaker adapter to 160mm, 165mm

Print with more wall layers or higher infill to allow to better screw in.

Bmw e46 M3 keychain minicar

Create a simple key ring for your car or make a gift for a friend Write a comment about which car you would like as a keychain Original model: https://www.thingiverse.com/thing:4720259

BMW e46 rear passanger cupholders + usb socket space

Cupholders for e46 with space for usb charger. Small holes on sides are for ambient lights smd led can be inserted. Perfectly fits Koch 500ml bottle. Version 1.0. If u use it please tag me at IG: tomas_lukacs thanks. NOT FOR COMERCIAL USE.

Bmw e46 wall key holder

bmw e46 siluette with hooks for keys

BMW E46 Compact Rear Speaker 5.25 Adapter

This is NOT a plug-and-play solution. Modifications to the aftermarket speakers WILL BE REQUIRED! Before buying this model, please Make sure your new speakers fit into the speaker adapter ring. Make sure your new speakers fit into the…

BMW E46 keychain

Bmw keychain

BMW E46 vent 52mm gauge pod

We did 6 different version to get it in the angle that it faces the driver. We had a tight fit so it did not need any mounting to the dash, but maybe some glue or other adhesive wouldn't hurt. Printed flat down on the surface, with ABS+…

E46 center airvent holder blank

A blank for E46 center airvents, can be used as a base for a gauge pod, switchpanel, phonemount etc, or simply a blanking plate. I made it as a mount to use a phone as a digital gauge for my driftcar, Added the file with holder for One+ 8…

BMW E46 Euro Tray Dual Cup Holder – Roller Cover Center Console

A functional dual cup holder designed for the BMW E46 center console with the roller/sliding cover, often referred to as the Euro Tray / Euro Console. The cup holder fits into the center-console storage area and provides two practical…

BMW Ventildeckel Kappe Valve Cover e38 e39 e46 e36 e34 e60 e61 11121726089

Für den Druck habe ich PETG Prusament verwendent. Nun schon einige Monate im Fahrzeug verbaut und hält ohne Probleme. Ich habe es auf meinem Prusa XL Multi Tool gedruckt mit standard Einstellungen. Die zwei Nasen habe ich nach dem Druck…

E46 Airvent Gaugepod

Gaugepod for 52mm gauges. I have only printed a testpiece of it, as i changed my setup to remove my single gauge when going to a stand alone, but my phone mount (pictured in my car) is made from the same model, so the overall fit in the…

BMW e46 Kühlwasser-AGB Deckel Abdrückwerkzeug

Ein Werkzeug zum prüfen des Ventils im Kühlwasserdeckel vom BMW e46. Einfach ein Reifenventil einsetzen, fertig! Unterextrusion kann zu Undichtigkeit führen :p Mit Gewinde nach unten drucken. Die Dichtung ist optional. A Tool for testing…

BMW E46 paddle shifter blanks

replaces the paddle shifter on the E46 after a manual swap IYKYK print with face down. works ok with a harder TPU but preferred an abs or PLA. textured plate gives a close to OEM feel

E46 M3 Silhouette Wall Art

Si jamais vous voulez que je fasse d'autre modèle qui vous plaise à n'hésiter pas à m'écrire pour que je fasse la voiture que vous voulez

HDD SSD Hard Drive Caddy Bracket for Lenovo Thinkpad T470 T480 T570 P50 P51 P70 P71 P72 E460 E580 E15 R14 E14 T14 S3 Caddy Holder

2.5" Drive HDD / SSD Laptop Drive Caddy Disk Tray Bracket for Lenovo ThinkPad. Compatible Models: For Thinkpad T470 T480 T570, For Thinkpad P50 P51 P51S, For Thinkpad P70 P71 P72, For Thinkpad E460(NOT E470)， For Thinkpad E480 E485 R480,…

BMW M3 E46 Wall Art

Wall Art featuring the BMW M3 E46 from the front. I modeled it using Inkscape. Hope you like it!

BMW e46 repair bracket for doorstep panel

Fits bmw e46 inner doorstep panel, only fits longitudinally brackets. possible fit for other bmw models as E53 e39 e38.

BMW e46 brake line hex nut for brake pipe bracket

Replace snapped BMW 318i e46 ABS hex nuts with a 3D printed one. Use proper automotive filament.

osVAC neo M32 and M40 for DEWALT DWE4257KT-QS angle grinder DWE46150

M40 and M32 male adapter for DeWalt angle grinder DWE46150 125 mm polishing attachment I printed it in PETG I modeled the DeWalt adapter myself and tested it until it fits perfectly! Because of the grip surface you can easily remove the…

BMW E46 Cup Holder

3D model description This is my alternative to the original BMW e46 Cupholder. It is tested and refined to simply and easily print in ABS/ASA/PETG. The design fits perfectly with the original console and holds tight. The assembly of the…

BMW E46 Cup holder

If you enjoy my content by me a coffee. Thank you for support beforehand :) https://buymeacoffee.com/MRinlandcost Commercial License If you would like to print and sell my work in link below you can find my Patreon account. IF you have…

E46 Third brake light

This a third brake light housing for an e46. The one on my car just snapped so I tried making a 3d printed one. My car is a coupe so I dont know if it differs to a sedan or postfacelif cars. Design is quite crude but it does what I wanted…

BMW E46 ashtray with switch for toggling cigarette lighter/12V outlet

This custom-designed replacement for the BMW E46 ashtray and storage insert solves the issue of the always-on 12V outlet. Normally the cigarette lighter/12V outlet remains powered even when the ignition is off. This insert includes a…

BMW e46 Gauge Rings

Rafts: No Supports: No Resolution: 0.20mm Infill: 0% Filament brand: NEBULA Filament color: White Filament material: PLA

BMW M3 E46 Keychain

BMW M3 E46 Keychain This keychain is inspired by the legendary BMW M3 E46 , a must-have for BMW and motorsport enthusiasts! For the best results, print with a 0.2 mm nozzle for finer detail. A stylish and practical accessory for M-series…

BMW E46 4" speaker adapter for lateral trim panel rear

E46 4" Speaker Adapter for Coupe/M3 This adapter screws directly into the original speaker pod. The threads are slightly loose, allowing space for Teflon tape. I applied Teflon tape to ensure a secure fit and prevent the speaker from…

USB Support Holder BMW e46

It's a USB holder for BMW e46. Original BMW part : 307090900 Materials : PLA / ABS Nozzle : 200°C Bed : 60°C

Shim for E46 M3 rear bumper panel sag

Removes the sag and gets the smallest clearance for the bumper to body without contact. Just slot the part into the support fender (51127895643 / 51127895644) and install the bumper as usual. The weight of the bumper will now rest on the…

BMW E46 cabin air filter retainer

Print in 100% infill. i recommend gluing in place.

2DIN RADIO FRAME BMW E46

Print settings: Step: 0.2 Shell: 2 Infill: 100% Supports: Yes Filament: ASA (Black)

E46 & E36 Brake line holder

E46 & E36 brake line holder. The brake line snaps in place, and the plug holds the lid snugly to the body. I printed it in PETG-CF & 0.16mm

BMW E46 Ashtray Storage insert

Inserts into the stock E46 ashtray, should be friction fit. I included all of my files, with the following features: .stl with the holder cutouts intended for my own use, Hörmann Garage Door Opener, a ISO/IEC 7810 ID1 cutout and a generic…

BMW e46 cupholder

Tip to save material: rotate the model 180 degrees. Nozzle 0,4mm

Mini BMW E46 (movable parts)

welp ill add an assembly tutorial here soon, otherwise the parts are pretty self explanitory. 02/06/2025 assembly tutorial: (note that the doors are attached with a piece of filament that goes from the bottom of the chassis and the…

BMW E46 ashtray insert, non-smoking package

Just make sure you are printing from heat and UV resistant material. 2 versions, one is loose fit, one should be tighter.

E30/E36/E46/E34.... Lower radiator rubber mount 17111178412

This bushing mounts on the radiator and then sits on the radiator mount. It's used on a lot of 90's BMW's OEM part number: 17111178412 Print in TPU! 3 Walls, 30% gyroid infill

BMW E46 fuel pump nut

Fuel pump and fuel level sensor nut for E46. Probably fits other models as well. Printed in PETG.

E46 ashtray gauge pod (52mm)

This gauge pod fits in the ashtray of the E46. I used prosport boost and AFR gauges. You need to cut the rear of the ashtray carefully, and take special care not to cut the gears or spring operating the lid. I printed this i ABS.

E46 coupe 6,5" rear shelf speaker adapter

Speaker adapter for 6,5" speakers in E46 coupe / 2-door rear shelf. Printed in PETG-CF @ 0.2mm. I used threaded inserts for all the bolts, but you could also thread the plastic directly.

BMW M3 E46 Wall-mounted

Please click if you appreciate my work :) Balance, aggression, and classic M spirit. This 3D printable wall-mounted model of the BMW M3 E46 Coupe captures the iconic lines of one of the most beloved generations of the M3. With its wide…

BMW M3 E46 Front Phone Stand

Please click if you appreciate my work :) The iconic front of the BMW M3 E46 – now reimagined as a sleek and functional phone stand! This model was designed specifically for 3D printing, capturing the signature lines of this automotive…

BMW E46 Rear Strut Shock Mount Plate

please give a like if you download. thank you.

bmw e36 e46 rear axle spacer 20mm

please give a like if you download. thank you.

bmw e36 e46 axle spacers

please give a like if you download. thank you.

e46 bearing

please give a like if you download. thank you.

USB Holder for BMW e46

This is a custom USB holder designed to replace the button blanking strip on a BMW E46 dashboard – the one next to the ASC/DSC button. It’s a remix of another model, but with serious upgrades: ✅ Now with 3 Holes : I added a third port so…

BMW E46 Switch Cover

Print with a filament that can survive the temperatures in the car. I have added the step so you could add buttons or anything else if you want.

BMW E46 panel przełączników

6x przełączników 21x15mm 1x przełącznik 25x31mm

BMW M3 E46 (Most Wanted Edition) - Tuner Car Model

Relive the excitement of tuner culture with this 3D printable STL model of the BMW M3 E46 (Most Wanted Edition). This iconic tuner car model is perfect for car enthusiasts and Need for Speed fans looking to display a legendary street…

Hotwheels BMW M3 E46 Display Base

Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…

bmw e46 repair wheel for the armrest joint

I created this repair wheel for the armrest, since it most often breaks or cracks in the joint, this wheel is installed and inserted in the place where the spring was originally. (and stick there)

BMW E46 Floor Mat Retention Clip

Got tired of the Velcro pads failing constantly, forcing me to adjust the floor mats every damn time I got in the car. This is my solution. Printing: Small part, so go 100% infill @ .2 or smaller Button face down Organic supports on…

Bmw e46 front tow point cap

I attached also the pictures to see how it fits

BMW E46 coin holder tray

This tray replaces the rubbery insert in the coin holder trim on the E46. Mine had begun to degrade, looking waxy and crumbling. I printed this from 85A TPU to replace it.

E46 Coupe Midrange Mount/tweeter Cover

This mounting solution used the factory location with the factory screws to let you mount any tweeter component speaker with a screw mount that you desire. The hole is currently set to 40mm, but i have included the f3d file to allow you…

E46 6.5" Speaker Mount Bracket

These brackets are sized to fit 6.5" speakers into an e46 using the 3screw mount. You will need to cut down the cups in the deck speaker port to have them fit, or just remove them. It takes some persuading to get it to fit. Printed mine…

BMW E46 coupe / convertible - support 25mm door tweeter

This adapter was used to mount a 25mm twweter of u-Dimension EL Comp 6 system into BMW E46 coupe. You need to print an aditional RH version of LH model provided below.

BMW E46 vent gauge holder for 52mm

This is a custom-designed, 3D printable vent gauge holder specifically made for the BMW E46 platform (1998–2006). Designed to fit directly into the center air vent, this holder allows you to mount a standard 52mm gauge (boost, AFR, oil…

BMW e46 tweeter mounting bracket

made for Rainbow DL-T20, maybe fits for other 25mm tweeters

E46 drift bumper mounts

Mounts to hang the sides of front and rear bumpers on e46 driftcars etc. that lacks the bumper side piece for the stock ones. (mine got damaged, but i suspect some aftermarket ones never have them) Bolts to the stock location on the car.…

E46 trunk lock cylinder delete

Just a dummy to put in place of a the rear trunk lock cylinder on trackcars etc. Fits just like the actual lock cylinder

BMW E46 Center console bin with retractable charger.

BMW E46 Center console bin with retractable charger. Extra things you need: Sandpaper/paint if you want to make it need. Retractable unit from a retractable 12v car charger from Aliexpress.…

E46 keychain

Simple E46 keychain, share your prints! :)

BMW M3 GTR (model E46)

classic car from nfs mw if you like it dont forget share your make and click like, i'll be glad if you take a look at my others projects

BMW E46 šroup na nářadí

šroub držící box s nářadím na dveřích kufru

BMW E46 Door Airbag Clip / Kapağı

Kolay kolay girmesi gerekiyor, girmez ise önce üst kısmı oturtup alt kısmı geçirin.

Oil Sump Drain Plug Cover Cap for BMW 3 Series (E46), Z4 (E85), Z4 (E86)

Original cover was warped, so i made a new one. v3 - fixed incorrect location of the hole for screw. v2 - after printing, noticed small reinforcements are no necessery and make cover warp. after removing them everything looks ok.

BMW M3 GTR (model E46)- Epic crash derby car

classic car from nfs mw as a figure to epic crash derby car if you like it dont forget share your make and click like, i'll be glad if you take a look at my others projects

BMW E46 M3 GTR (Legendary Model)

A classic BMW M3 model, well known to Need for Speed fans. I really enjoyed modeling it, and I hope you like it too. Note: I recommend keeping the print settings at standard.

BMW E46 M3 Cookie Cutter

Detailed E46 M3 cookie cutter

(DRAFT) Plug wiper fluid e46 (for xenon washer delete)

For the e46 you can remove the system for the xenon lights washer fluid. if you are deciding to remove the system and save weight. well better then also remove the pump. BMW does not have an OEM part number for this, so here is my shot.…

BMW E46

Bmw E46 M3

E46 Curved Gutter Trim Clip

Print standing vertically, Coat with a clear Just glue on your trim and push it on Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .28 Infill: 10% Filament: eSun PLA+…

BMW M3 E46 Anime car

Hey I made this M3 e46 using ia tools, i hope you like it !

BMW e46 M54B22 Intake vacum/smoke test adaptor

BMW e46 M54B22 Intake vacuum/smoke test adapter Made it to test for any vacuum leaks. Fits e46 m54b22 or other cars with intake diameter equal to 80mm Supposed to be used with Standard automotive valve. (Unfortunately the rubber one is…

BMW E46 front Msport bumper tow hook cover / tow eye cover / tow point cap

Lost you tow point cover? Me to Never actually got one with my msport bumpers and SE does not fit at all Couldn't be bothered with overpaying in dealership or paying for model I made one myself Took a lot of prototypes and it's not ideal…

Plastic Grommet 51131840154 for BMW E30, E36, E46, E90, E92

E30 (and many other chassis) plastic grommet used in the front grill installation and rear license plate.

BMW E46 Switch Cover with USB port holder

My After Market Android Auto radio has 2 USB ports but my BMW E46 has no place to put them. So the unused space of the switch cover was a perfect candidate. The pictures here are the PLA test prints because I am waiting for the Black PETG…

BMW E46 gear shifter rear bushing

You must use the old metal housing. Printed in FLEX and glued inside. OEM: 25111222015 Strongflex: 031933 Should fit: BMW 1 E81 E82 E87 E88 BMW 1 F20 F21 BMW 2 F22 F23 BMW 2 M2 F87 BMW 3 E36 BMW 3 E46 BMW 3 E90 E91 E92 E93 BMW 3 F30 F31…