Minisforum MS-01 1-1/3U Rack (10 inch)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Couldn't find a Rack shelf for the MS-01 that fits in a 10" server rack so created my own.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 637
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Couldn't find a Rack shelf for the MS-01 that fits in a 10" server rack so created my own. Prints vertically, and can fit small printers. My bed is 220x220x250 (K1 SE).
As you install the MS-01 it is a tight fit as I didn't want it to accidently slide out.
Will add more cutouts in near future, but wanted to make sure it was strong enough, before I added them for the heat ventilation on the bottom. Also due to the height of the MS-01, I made it 1 ⅓ U in height to make sure there was some air flow all around.