1 / 1
Minisforum MS-01 1-1/3U Rack (10 inch) — image 1

Minisforum MS-01 1-1/3U Rack (10 inch)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Couldn't find a Rack shelf for the MS-01 that fits in a 10" server rack so created my own.

Rating
0 / 5
Likes
9
Downloads
99
Makes
0
Views
637
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

Couldn't find a Rack shelf for the MS-01 that fits in a 10" server rack so created my own.  Prints vertically, and can fit small printers.  My bed is 220x220x250 (K1 SE).

As you install the MS-01 it is a tight fit as I didn't want it to accidently slide out.

Will add more cutouts in near future, but wanted to make sure it was strong enough, before I added them for the heat ventilation on the bottom.  Also due to the height of the MS-01, I made it 1 ⅓ U in height to make sure there was some air flow all around.

Tags