1 / 3
Prusa Core One Feet 30 mm high
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raised feet that can be used with the rubber feet supplied
- Ocena
- 5 / 5
- Polubienia
- 109
- Pobrania
- 415
- Wydruki
- 32
- Wyświetlenia
- 1511
- Oceny
- 28
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 32) (Komentarze: 39)Remiksy (1)Kolekcje (185)Powiązane
I raised @Ondrashek's ingenious design by 25 mm so that the new height is around 30 mm between the printer and the floor.
I did this mainly so that I could use @mayty plate holder.