Xmaxx Battery Holder with Straps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A battery holder with which the batteries can be attached with straps
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
With this holder, the batteries can be attached to the compartment with straps instead of the original temples. Similar systems can already be bought as accessories from third-party manufacturers. However, I didn't want to drill into my chassis.
I traced the original holders with CAD and added corresponding parts. The individual parts are held together by means of screws. The straps are then pulled through under the retaining plate.
In my current setup, I printed the base holders with PLA-CF. The plate with TPU (100% infill) and the buffer with TPU (10% infill). So far, everything has worked very well with these materials. Of course, other materials can also be used here.
The free holes in the base plate are for the buffer, it can be screwed on the back or front.
Please contact me if there is anything I can improve. (Except my bad English :) )