1 / 3
SK120x compact short case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact case that is only as tall as the module itself
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
A compact case that is only as tall as the module itself while having all the input and output I need. It's in 4 part to make printing and assembly easier since it have so many connections.
It's a bit flimsy while being assembled, but very solid afterward.
- Input: XT60, Powerpole, DC barrel jack (5.5x2.1mm) and USB Type-C PD as input options.
- Output' Powerpole, DC barrel jack (5.5x2.1mm), USB Type A and USB Type-C PD (using SW3516 or SW3518 board) for outputs.
BOM:
- 1x SK120x buck-boost converter module. It's capable up to 36v and 6a.
- 2x Powerpole
- 1x XT60 connector (both male or female are compatible)
- 2x 5.5x2.1 DC barrel jack
- SW3516 or SW3518 USB Type-C PD board (can only buck, so if you want to use 20v Type-C output, you'll need to set the module to output at least 24v)
- 4x 3mm screw, 6mm length.
- Cables cut to lengthA compact case that is only as tall as the module itself while having all the input and output I need. It's in 4 part to make printing and assembly easier since it have so many connections.